Global
Controls proudly represents the AirTest line of gas detection sensors.
AirTest manufactures high-quality gas sensors and controllers for many
applications.
Click Here To Download
The Gas Guide, To Help You Make The Right Selection.
•One
of our most unique products it our CT-1000, Gas Sensor/Controller. •It
can be use on line voltage 115VAC or 220VAC and 24VAC, making it compatible
to any application.
•The CT-1000 is also CSA Certified. •Download
the CT-1000 & CT-2100 Cut Sheet. •Download
the CT-1000 Manual. •Download
the CT-2100 Manual.
•The
TR3200 is a high accuracy Electrochemical gas sensor that can be factory
configured to measure a wide range of gases of applicable
to health and safety applications. •This
loop-powered sensor delivers a linear 4-20 ma output that is easily
integrated into any building control, ventilation
or alarm application.
•The low profile design can be attached to any single gang electrical
box and features an economical
replaceable sensor element. •Download
the TR-3200 Cut Sheet. •Download
the TR-3200 Manual. •Download
the LON Options Cut Sheet. •Download
the LON Works Product Guide.
•The
TR5200 is a high accuracy catalytic bead gas sensor/transmitter that
can be used to detect LEL
(Lower Explosive Limit) concentrations of a wide range
of combustible gases.
•The
TR5500 provides similar detection capability in an explosion-proof enclosure
for Class 1 Division 1 Groups A, B and C areas.
•Output
options include a 4-20 mA analog or a LonWorks® compatible communication
signal. •Download
the TR-5200 Cut Sheet. •Download
the TR-5200 Manual. •Download
the LON Options Cut Sheet. •Download
the LON Works Product Guide.
•The
PT-1000 is a personal combustion gas alarm.
•Simple
to operate.
•Low maintenance.
•Small, lightweight.
•Rugged
housing – impact-resistant ABS compound – corrosion and water-resistant.
•CSA approved. •Download
the PT-1000 Cut Sheet.
Click Here To Download
The Gas Guide, To Help You Make The Right Selection.
